How To Remove Tap Windows Adapter V9?

A lot of users have been experiencing issues with the so-called Tap Windows Adapter V9. This is a driver that is generally installed on computers using VPN software. A VPN allows users to have a secure and encrypted connection to virtual servers all over the world. Most importantly, VPN software requires Tap Windows Adapter in order to function and let users connect to its servers.

Despite being a necessity, users are having trouble connecting to the internet when this application is running. Moreover, rebooting or uninstalling the VPN doesn’t seem to disable Tap Windows Adapter. When connectivity issues like this arise, you may be left a little confused. But don’t worry! It’s rather easy to remove the Tap Adapter and we’ll explain it more in detail below.

What Is Tap Windows Adapter V9?

As mentioned earlier Tap Windows Adapter V9 is installed on your device when you set-up a VPN. Some of the VPN you may have installed or may be familiar with are ExpressVPN, CyberGhost, and NordVPN.

Essentially, Tap Windows Adapter V9 is a network driver, that allows you to enable a private connection to the VPN’s global servers. Despite its pesky nature when connectivity issues are present, it is in fact a completely secure and safe driver software. It is in no way malware or virus and actually helps you establish a secure connection to VPN servers.

Despite its benevolence, it can become a major issue for users who want to uninstall their VPN software. After attempting to do this, they’ll restart their computer to find that Tap Windows Adapter V9 is still enabled in their Device Manager.

Naturally, users will tamper with this driver by disabling it or deleting local files only to find that it has made problems worse. Internet and network issues start appearing and you’re left with no solution. However, there are several ways you can get rid of Tap Windows V9 once and for all. Let’s discuss them in the section below!

How To Remove Tap Windows Adapter V9?

If you’re constantly having issues with Tap Windows Adapter on your system we recommend you try the following methods when trying to remove it. Please note, the first two solutions will only re-enable or reinstall Tap Windows Adapter(which will fix most connectivity issues).

If you want to completely remove Tap Windows Adapter from your computer skip on ahead to Solution 3. These methods are very simple and can be done by even the most novice PC users. So, let’s get started!

Solution 1: Uninstall Tap Windows Adapter Driver

The easiest way to uninstall the Tap Windows Adapter V9 is by removing its network driver using Windows’ built-in tool known as Device Manager. Device Manager allows you to manage, configure, and update drivers for all of the hardware devices connected to your system. Follow the steps below to remove Tap Windows Adapter V9:

  1. Open Device Manager by searching for it in your start menu.
  2. Now, expand the arrow next to Network Adapter and look for TAP-Windows Adapter V9. Next, right-click it and select “Uninstall device”.
  3. Windows will open a prompt asking you to confirm the removal of the device. Select “Uninstall” to remove the driver.

After uninstalling your driver you should restart your computer to apply the changes. For most users, their connectivity and internet issues will be resolved. However, Tap Windows Adapter may still appear in Device Manager, as VPN software will automatically re-install and enable all network drivers.

Solution 2: Reset Your Local Area Connection

Similar to Solution 1, this method will basically restart Tap Windows Adapter V9. In most cases, this will alleviate any internet issues you have been facing. The process is very simple, just follow the steps below:

  1. In your start menu search bar, type Control Panel, and select the application from the results.
  2. Next, go to Network and Internet settings and select “Network Sharing Center”.
  3. Navigate your way to your network connections by selecting the “Change adapter settings” in the left-hand column.
  4. Lastly, right-click on the internet connection currently in use and select Disable.
  5. Wait a few seconds, right0click it again, and this time select Enable.

You should now be able to connect to the internet. It’s important to realize this won’t remove Tap Windows Adapter V9, it will simply reset it and attempt to fix your connectivity issues.

Solution 3: Remove Tap Windows Adapter V9 Completely

Unfortunately, the only way to remove Tap Windows Adapter V9 is by uninstalling your VPN client. If you’ve attempted the previous methods you may have realized that Tap Windows Adapter V9 reappears after you reboot your computer.

This is because most VPN clients detect if any important network drivers are missing and automatically reinstall them. If you absolutely require your VPN software, then we recommend you follow the steps below and afterward, reinstall the VPN software again to resolve any connectivity issues.

  1. Open “Programs and Features” by opening the Run Dialog box (Windows Key+ R) and entering “appwiz.cpl”.
  2. Next search for your VPN client and select Uninstall.
  3. An uninstaller window may open, follow the onscreen instructions to remove the client.

As you remove your VPN client, the Tap Windows Adapter V9 driver will automatically be removed from your computer. If necessary you can go back to Device Manager and uninstall it there as well. However, after removing your VPN client it will no longer be reinstalled.

Final Words

We hope this article helped you gain a better understanding of the Tap Windows Adapter V9. This network driver is not malicious and shouldn’t cause too much worry. Usually, a quick reset of your network connection or reinstalling the driver should fix the issue.

Unfortunately, if you want to remove it completely you’ll have to uninstall any VPN clients that you are using. If you have any questions or concerns, please leave them in the comments below. Thanks for reading!

Leave a Reply

Your email address will not be published.

You May Also Like